How To Attach A Gangway To A Floating Dock

How to Attach a Floating Dock to Shore

Attaching a floating dock to shore is one of the most fundamental steps you take to preserve longevity and ensure information technology is safe for use. But the procedure tin be tricky; while the dock needs to exist securely tethered, it must too have enough flexibility to accommodate vertical and horizontal movements of the water. Here are some how-to's to help.

Floating Dock Zipper Methods

Without a proper dock anchoring system, floating docks are susceptible to wind, currents, debris, fluctuations in water levels, and storms. The first pace is to cull the right attachment method – and AccuDock has many options including:

• Aluminum Floating Dock Piling Hoop Subclass – This attachment method requires 2 pilings to exist pounded into the seafloor. Each piling hoop subclass has pile rollers that should be 2 inches larger than the piling diameter or width. For example, a 12″ bore piling or a 12″ x 12″ square piling will require a hoop subclass with xiv″ pile rollers. This allows for a one-inch gap around the piling to prevent binding.
• Piling – A piling mountain requires you to measure the water level at maximum high tide and at maximum low tide, so you can attach your floating dock to ensure the water level stays below the standing surface of the dock equally much as possible.
• Piling Hoop Bracket – Affordable and durable, a piling hoop bracket floating dock attachment method once more requires a piling to exist pounded into the seafloor. A standard piling hoop bracket has pile rollers that should be two inches larger than the piling diameter. For example, a 12″ bore piling will get a hoop bracket with 14″ pile rollers, again allowing for a i-inch gap effectually the piling to forbid binding. This is a good floating dock attachment option for scenarios where slide assemblies aren't feasible or applicable.
• Piling Slide Assembly – With this incredibly stable attachment method, ii pilings must be pounded into the sea floor. The pilings cannot be gear up wider than the dock width. An inner tube gets fixed to each piling, while an outer tube gets fixed to the floating dock, allowing it to move independently. A cosmetic comprehend slides over the inner and outer tubes as an aesthetic and protective comprehend.
• Seawall Slide Assembly – This extremely stable floating dock attachment method is about identical to the piling slide assembly method. Nonetheless, the inner tubes get affixed to the existing seawall vs. pilings.
• Small Slide Assembly – Again, this method is nearly identical to the piling and seawall slide assembly zipper methods. Nonetheless, the inner tubes become affixed to an existing floating dock vs. pilings or a seawall. This method tin can exist used to adhere a low-contour floating dock to another floating dock with a higher profile.
• Command Arm – Used when a floating dock, or nearly of it, runs parallel to the shoreline, a control arm offers an culling to driving pilings into the seafloor to reach optimum stabilization. This method is as well good when large water fluctuations are nowadays.
• Upper and Lower Brackets – This method for attaching a floating dock to shore affixes the dock to a seawall using several four-inch SCH 40 PVC pipes, with the bottom of the pipes existence pounded into the seafloor. The upper and lower brackets anchoring method is oftentimes recommended for use with corrugated and/or graduated seawalls.
• Gangways and Ramps – This method is used when the dock needs to be set away from the shore to reach a specific desired water depth. The gangways and ramps allow the dock to motility freely vertically, simply they must connect to a stock-still abutment.

Please click on the post-obit link for more information about our floating dock attachment methods. If y'all need help attaching a floating dock to shore, ask the AccuDock squad. Nosotros are happy to explain the dissimilar methods and help y'all decide which is the best solution for your specific needs. Nosotros'll also make certain the process is quick, simple, and painless!

Source: https://www.accudock.com/blog/attaching-a-floating-dock-to-shore/

Share this post